Setup the driver for the preview camera “DFK21F04”

 

 

These instructions describe the procedures to install the driver for the preview camera “DFK 21F04” on a computer with the operating system Windows® 7 x 64bit; used with the SCAN, MIDI or DESK!

The shown procedure is based on the install DVD of the software version 1.16; and is used to install the driver for:

 

·      Control and interfacing the preview camera “DFK 21F04”

 

 

       Contents

 

Detect      the camera

Setup       the camera driver

Setup       via Device Manager

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Requirements

·      Installed operating system Windows® 7 x 64bit

·      The install CD / DVD of the software version to be installed

 

See also:      Preview camera “DFK21F04”

 

·      The installation should be done from a HDD, DVD or a pen drive.

 

 

 

 

 

 

 

 

 

 

 

 

·      Connect the preview camera to a not occupied FireWire controller or card (not occupied by the AVT camera driver).

 

Start the file

<Drive>:\Drivers\ Preview camera for MIDI, SCAN, DESK (DFK)\drvInstaller_x64.exe

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If this dialogue is shown, the camera is not recognized.

 

Press cancel and start the driver again after modifications are done!

 

 

If the camera will not be recognized

·      Check the correct connection of the external and internal FireWire cable.

·      Try with another external FireWire cable.

·      Try with another FireWire port or controller.

 

Check the camera as described in:       

          How to check the preview camera

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If this dialogue is shown, the camera is recognized.

 

 

 

 

 

·      Welcome dialogue of the driver installer

 

 

 

 

 

 

Press “Next”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

·      Setup in progress

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

·      Dialogue “Finish” of the installer

 

 

 

 

 

 

 

 

Press “Finish”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Setup     Driver of the camera “DFK21F04” via the Device Manager

 

 

 

 

 

Start the “Device manager”

 

Press “Start”(1), “Computer”(2), “System properties”(3),and “Device Manager”(4).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Connect the camera

 

If the camera is connected, it will be shown by the device manager automatically.

·      “Imaging devices”, “Imaging Source DFK 21F04

 

If the camera will not be recognized

·      Check the connection

·      Try with another FireWire cable

·      Try with another FireWire port

·      Try with another FireWire controller or card

 

Check the camera as described in:       

          How to check the preview camera

 

 

Start the dialogue “Properties” by double click on “Imaging Source DFK 21F04

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

·      Select the tab “Driver”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

·      Press “Update driver …”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Click on “Browse my computer …”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

·      Check “Include subdirectories”

 

 

·      Browse for the folder, on the install DVD

 

 

 

 

<Drive>:\Drivers\ Preview camera for MIDI, SCAN, DESK (DFK)\data\drivers\x86\”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

·      Select the folder “…\Drivers\Preview camera for MIDI, SCAN, DESK (DFK)\data\drivers\x86\”

 

 

 

 

Press “OK”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press “Next”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press “Close”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press “Close”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press “Exit”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

End