• Pannoramic DESK II ^[39]
  • General description
  • 1 Housing ^[4]
    • 1.1 Introduction
    • 1.2 Removing and mounting the housing
    • 1.3 Slide door ^[1]
      • 1.3.1 Adjusting the door sensor position
  • 2 Construction ^[4]
    • 2.1 Introduction
    • 2.2 Base plate
    • 2.3 Scanner plate ^[1]
      • 2.3.1 Adjusting the scanner plate position
  • 3 Optics and illumination ^[6]
    • 3.1 Introduction
    • 3.2 Components
    • 3.3 Optics and illumination adjustments
    • 3.4 Illumination uniformity adjustments
    • 3.5 Image path adjustment
    • 3.6 Optical path adjustment
  • 4 Preview unit ^[3]
    • 4.1 Introduction
    • 4.2 Components
    • 4.3 Configuring the preview unit
  • 5 Focus unit ^[3]
    • 5.1 Introduction
    • 5.2 Components
    • 5.3 Exchanging the objective
  • 6 X-Y stage unit ^[5]
    • 6.1 Introduction
    • 6.2 Components
    • 6.3 Configuring the X-Y stage unit
    • 6.4 Exchanging the X-Y stage unit
    • 6.5 Finding the hardware limits
  • 7 Power and control ^[6]
    • 7.1 USB controller
    • 7.2 DC controller
    • 7.3 Controller connections
    • 7.4 Stepper motor
    • 7.5 Electrical components
    • 7.6 Cabling summary
• Pannoramic DESK ^[30]
  • General description
  • 1 Housing ^[5]
    • 1.1 Introduction
    • 1.2 Removing the housing
    • 1.3 Mounting the housing
    • 1.4 Slide door ^[1]
      • 1.4.1 Adjusting the door sensor position
  • 2 Construction ^[6]
    • 2.1 Introduction
    • 2.2 Base plate
    • 2.3 Scanner plate ^[1]
      • 2.3.1 Adjusting the scanner plate position
    • 2.4 Specimen holder fixing ^[1]
      • 2.4.1 Adjusting the specimen holder fixing
  • 3 Optics and illumination ^[6]
    • 3.1 Introduction
    • 3.2 Components
    • 3.3 Optics and illumination adjustments
    • 3.4 Illumination uniformity adjustments
    • 3.5 Image path adjustment
    • 3.6 Optical path adjustment
  • 4 Preview unit ^[3]
    • 4.1 Introduction
    • 4.2 Components
    • 4.3 Configuring the preview unit
  • 5 Focus unit
  • 6 X-Y stage unit ^[2]
    • 6.1 Components
    • 6.2 Defining parameters
  • 7 Power and control
• Pannoramic MIDI II ^[56]
  • General description
  • 1 Housing ^[2]
    • 1.1 Introduction
    • 1.2 Removing and mounting the housing
  • 2 Construction ^[6]
    • 2.1 Introduction
    • 2.2 Base plate
    • 2.3 Scanner plate
    • 2.4 Turret plate
    • 2.5 Truss
    • 2.6 Supporter tube
  • 3 Optics and illumination ^[7]
    • 3.1 Introduction
    • 3.2 Components
    • 3.3 Optics and illumination adjustments
    • 3.4 Illumination uniformity adjustments
    • 3.5 Image path adjustment
    • 3.6 Optical path adjustment
    • 3.7 Camera changer adjustment
  • 4 Preview unit ^[3]
    • 4.1 Introduction
    • 4.2 Components
    • 4.3 Configuring the preview unit
  • 5 Focus unit ^[3]
    • 5.1 Introduction
    • 5.2 Configuring the scanner with objective changer
    • 5.3 Exchanging the objective
  • 6 X-Y stage unit ^[5]
    • 6.1 Introduction
    • 6.2 Components
    • 6.3 Configuring the X-Y stage unit
    • 6.4 Exchanging the X-Y stage unit
    • 6.5 Finding the hardware limits
  • 7 Turret unit ^[7]
    • 7.1 Introduction
    • 7.2 Functional overview
    • 7.3 Construction
    • 7.4 Components
    • 7.5 Exchanging the filter blocks
    • 7.6 Adjustment tools
    • 7.7 Adjustment procedures
  • 8 Main accessory ^[7]
    • 8.1 Introduction
    • 8.2 Components
    • 8.3 Slide sensing
    • 8.4 Principle of the slide loader movement
    • 8.5 Setup and adjustment procedures
    • 8.6 Adjustment tests
    • 8.7 Exchanging the tray unit
  • 9 Power and control ^[6]
    • 9.1 USB controller
    • 9.2 DC controller
    • 9.3 Controller connections
    • 9.4 Stepper motor
    • 9.5 Electrical components
    • 9.6 Cabling summary
• Pannoramic MIDI ^[44]
  • General description
  • 1 Housing ^[2]
    • 1.1 Introduction
    • 1.2 Removing and mounting the housing
  • 2 Construction ^[4]
    • 2.1 Introduction
    • 2.2 Base plate
    • 2.3 Scanner plate
    • 2.4 Supporter tube
  • 3 Optics and illumination ^[7]
    • 3.1 Introduction
    • 3.2 Components
    • 3.3 Optics and illumination adjustments
    • 3.4 Illumination uniformity adjustments
    • 3.5 Image path adjustments
    • 3.6 Optical path adjustments
    • 3.7 Camera changer adjustment
  • 4 Preview unit ^[3]
    • 4.1 Introduction
    • 4.2 Components
    • 4.3 Configuring the preview unit
  • 5 Focus unit ^[3]
    • 5.1 Introduction
    • 5.2 Configuring the scanner with objective changer
    • 5.3 Exchanging the objective
  • 6 X-Y stage unit ^[1]
    • 6.1 Components
  • 7 Reflector turret unit ^[7]
    • 7.1 Introduction
    • 7.2 Functional overview
    • 7.3 Construction
    • 7.4 Components
    • 7.5 Exchanging the filter blocks
    • 7.6 Adjustment tools
    • 7.7 Adjustment procedures
  • 8 Main accessory ^[7]
    • 8.1 Introduction
    • 8.2 Components
    • 8.3 Slide sensing
    • 8.4 Principle of the support plate
    • 8.5 Setup and adjustment procedures
    • 8.6 Adjustment tests
    • 8.7 Exchanging the tray and slide loader units
  • 9 Power and control
• Pannoramic SCAN II ^[73]
  • General description
  • 1 Housing ^[3]
    • 1.1 Introduction
    • 1.2 Removing and mounting the housing
    • 1.3 Preparation
  • 2 Construction ^[6]
    • 2.1 Introduction
    • 2.2 Base plate
    • 2.3 Truss
    • 2.4 Scanner plate
    • 2.5 Turret plate
    • 2.6 Supporter tube
  • 3 Optics and illumination ^[7]
    • 3.1 Introduction
    • 3.2 Components
    • 3.3 Optics and illumination adjustments
    • 3.4 Illumination uniformity adjustments
    • 3.5 Image path adjustment
    • 3.6 Optical path adjustment
    • 3.7 Camera changer adjustment
  • 4 Preview unit ^[3]
    • 4.1 Introduction
    • 4.2 Components
    • 4.3 Configuring the preview unit
  • 5 Focus unit ^[3]
    • 5.1 Introduction
    • 5.2 Configuring the scanner with objective changer
    • 5.3 Exchanging the objective
  • 6 X-Y stage unit ^[5]
    • 6.1 Introduction
    • 6.2 Components
    • 6.3 Configuring the X-Y stage unit
    • 6.4 Adjusting the parallelogram
    • 6.5 Finding the hardware limits
  • 7 Reflector turret unit ^[7]
    • 7.1 Introduction
    • 7.2 Functional overview
    • 7.3 Construction
    • 7.4 Components
    • 7.5 Exchanging the filter blocks
    • 7.6 Adjustment tools
    • 7.7 Adjustment procedures
  • 8 Main accessory ^[23]
    • 8.1 Introduction
    • 8.2 Functional overview
    • 8.3 Configuring the magazine unit
    • 8.4 Components ^[2]
      • 8.4.1 Slide loader construction
      • 8.4.2 Exchanging the optical sensor
    • 8.5 Component adjustments
    • 8.6 Slide insertion and removal
    • 8.7 Magazine loading and unloading ^[3]
      • 8.7.1 Adjusting the magazine stack wheels
      • 8.7.2 Aligning the cogs of the magazine rack and the feeder wheels
      • 8.7.3 Adjusting the magazine loading mechanics
    • 8.8 Adjusting the slide insertion and removal positions ^[6]
      • 8.8.1 Adjusting the position of the magazine unit
      • 8.8.2 Adjusting the position of the magnet disc
      • 8.8.3 Checking and adjusting the magazine position
      • 8.8.4 Adjusting the slide insertion position in X direction
      • 8.8.5 Defining parameter values
      • 8.8.6 Adjusting the final insertion position in Y direction
    • 8.9 Final checks
    • 8.10 Magazine loading, unloading, and slide insertion and removal tests ^[1]
      • 8.10.1 Mistakes and abnormal or faulty behavior
    • 8.11 Parameter list
  • 9 Power and control ^[6]
    • 9.1 USB controller
    • 9.2 DC controller
    • 9.3 Controller connections
    • 9.4 Stepper motor
    • 9.5 Electrical components
    • 9.6 Cabling summary
• Pannoramic SCAN ^[62]
  • General description
  • 1 Housing ^[3]
    • 1.1 Introduction
    • 1.2 Removing and mounting the housing
    • 1.3 Preparation
  • 2 Construction ^[5]
    • 2.1 Introduction
    • 2.2 Base plate
    • 2.3 Truss
    • 2.4 Scanner plate
    • 2.5 Turret plate
  • 3 Optics and illumination ^[7]
    • 3.1 Introduction
    • 3.2 Components
    • 3.3 Optics and illumination adjustments
    • 3.4 Illumination uniformity adjustments
    • 3.5 Image path adjustment
    • 3.6 Optical path adjustment
    • 3.7 Camera changer adjustment
  • 4 Preview unit ^[3]
    • 4.1 Introduction
    • 4.2 Components
    • 4.3 Configuring the preview unit
  • 5 Focus unit ^[3]
    • 5.1 Introduction
    • 5.2 Configuring the scanner with objective changer
    • 5.3 Exchanging the objective
  • 6 X-Y stage unit ^[3]
    • 6.1 Components
    • 6.2 Carriage unit adjustments
    • 6.3 Adjusting the parallelogram
  • 7 Reflector turret unit ^[7]
    • 7.1 Introduction
    • 7.2 Functional overview
    • 7.3 Construction
    • 7.4 Components
    • 7.5 Exchanging the filter blocks
    • 7.6 Adjustment tools
    • 7.7 Adjustment procedures
  • 8 Main accessory ^[21]
    • 8.1 Introduction
    • 8.2 Functional overview
    • 8.3 Configuring the magazine unit
    • 8.4 Components ^[1]
      • 8.4.1 Slide loader construction
    • 8.5 Component adjustments
    • 8.6 Slide insertion and removal
    • 8.7 Magazine loading and unloading ^[2]
      • 8.7.1 Adjusting the magazine loading mechanics
      • 8.7.2 Adjusting the magazine loading and feeding mechanics
    • 8.8 Adjusting the slide insertion and removal positions ^[6]
      • 8.8.1 Adjusting the position of the magazine unit
      • 8.8.2 Adjusting the position of the magnet disc
      • 8.8.3 Checking and adjusting the magazine position
      • 8.8.4 Adjusting the slide insertion position in X direction
      • 8.8.5 Defining parameter values
      • 8.8.6 Adjusting the final insertion position in Y direction
    • 8.9 Final checks
    • 8.10 Magazine loading, unloading, and slide insertion and removal tests ^[1]
      • 8.10.1 Mistakes and abnormal or faulty behavior
    • 8.11 Parameter list
  • 9 Power and control
• Pannoramic P250 FLASH ^[140]
  • General description
  • 1 Scanner versions ^[3]
    • 1.1 Pannoramic P250 brightfield version
    • 1.2 Pannoramic P250 fluorescent version
    • 1.3 Upgrading the Pannoramic P250 brightfield version
  • 2 Housing ^[7]
    • 2.1 Introduction
    • 2.2 Emergency switch
    • 2.3 Stack cover
    • 2.4 Upper cover
    • 2.5 Lower cover
    • 2.6 Removing and mounting the housing
    • 2.7 Rear cover
  • 3 Construction ^[10]
    • 3.1 Introduction
    • 3.2 Base plate
    • 3.3 Transport handles
    • 3.4 Rubber feet
    • 3.5 Power supply
    • 3.6 Truss
    • 3.7 Scanner unit
    • 3.8 Horseshoe
    • 3.9 Turret plate
    • 3.10 Specimen holder
  • 4 Computer and configuration
  • 5 Optics and illumination ^[7]
    • 5.1 Introduction
    • 5.2 Components
    • 5.3 Upgrading the illumination path to software version 1.16
    • 5.4 Optics and illumination adjustments
    • 5.5 Image path adjustment
    • 5.6 Optical path adjustment
    • 5.7 Changing the color filter
  • 6 Preview unit ^[9]
    • 6.1 Introduction
    • 6.2 Components
    • 6.3 Configuring the preview unit
    • 6.4 Defining the scan area
    • 6.5 Adjustments of the preview unit ^[4]
      • 6.5.1 Setting the aperture of the preview objective
      • 6.5.2 Adjusting the focus of the preview objective
      • 6.5.3 Adjusting the rotation angle of the preview camera
      • 6.5.4 Adjusting the position of the brightfield preview illumination
  • 7 Camera changer unit ^[15]
    • 7.1 Introduction
    • 7.2 Components ^[1]
      • 7.2.1 Exchanging the motor
    • 7.3 Exchanging the camera changer unit
    • 7.4 Configuring the camera changer unit
    • 7.5 Functional overview
    • 7.6 Camera changer adjustments ^[8]
      • 7.6.1 Calibrating the autocollimator
      • 7.6.2 Finding the hardware limits
      • 7.6.3 Adjusting the mirror plane position
      • 7.6.3.1 Shifting the mirror plane on the optical axis
      • 7.6.3.2 Inclining the mirror plane
      • 7.6.3.3 Rotating the mirror plane
      • 7.6.3.4 Bumper position
      • 7.6.4 Adjustment tools
  • 8 Focus unit ^[17]
    • 8.1 Introduction
    • 8.2 Configuring the objective changer unit
    • 8.3 Functional overview
    • 8.4 Components ^[3]
      • 8.4.1 Objective position
      • 8.4.2 Adjusting permanent magnet position
      • 8.4.3 Mounting the objectives
    • 8.5 Setting up the objectives
    • 8.6 Adjustments of the objective changer unit ^[4]
      • 8.6.1 Dismounting and mounting the objective
      • 8.6.2 Checking and adjusting the objective position
      • 8.6.3 Dismounting and mounting the condenser
      • 8.6.3.1 Adjusting the condenser position
    • 8.7 Adjustments of the focusing part
    • 8.8 Exchanging the focus unit
    • 8.9 Aligning the objective into the optical axis ^[1]
      • 8.9.1 Aligning the objective changer position
  • 9 X-Y stage unit ^[7]
    • 9.1 Introduction
    • 9.2 Configuring the X-Y stage unit
    • 9.3 Functional overview
    • 9.4 Components
    • 9.5 Carriage unit adjustments
    • 9.6 Exchanging the X-Y stage unit
    • 9.7 Adjusting the parallelogram
  • 10 Reflector turret unit ^[8]
    • 10.1 Introduction
    • 10.2 Configuring the turret unit
    • 10.3 Functional overview
    • 10.4 Construction
    • 10.5 Components
    • 10.6 Exchanging the filter blocks
    • 10.7 Adjustment tools
    • 10.8 Adjustment procedures
  • 11 Main accessory ^[28]
    • 11.1 Introduction
    • 11.2 Functional overview
    • 11.3 Configuring the magazine unit
    • 11.4 Components ^[3]
      • 11.4.1 Component adjustments
      • 11.4.2 Modified magnet disc
      • 11.4.3 Slide loader construction
    • 11.5 Magazine loading and unloading
    • 11.6 Slide insertion and removal
    • 11.7 Magazine unit adjustments ^[13]
      • 11.7.1 Checking or defining the hardware limits of the X-Y stage unit
      • 11.7.2 Checking or adjusting the magazine unit position
      • 11.7.3 Position and size of the specimen holder fixing fork
      • 11.7.4 Checking or adjusting the magazine position for slide insertion and removal
      • 11.7.5 Checking the magazine loading and unloading
      • 11.7.6 Defining the DefaultPositionX parameter value
      • 11.7.7 Adjusting the slide insertion position in X-direction
      • 11.7.8 Checking or adjusting the position and height of the inner finger
      • 11.7.9 Setting the slide insertion position in Y-direction
      • 11.7.10 Adjusting the final insertion position in Y-direction
      • 11.7.11 Defining the removal parameters
      • 11.7.12 Checking the position of the slide leading spring
      • 11.7.13 Adjusting the slide clamp lifter position
    • 11.8 Adjustment finalizing ^[1]
      • 11.8.1 Slide insertion and removal test
    • 11.9 Magazine loading and unloading and slide insertion and removal test ^[1]
      • 11.9.1 Mistakes and faulty behavior during slide insertion
    • 11.10 Parameter list
  • 12 Power and control ^[8]
    • 12.1 Introduction
    • 12.2 Configuring the electrical components
    • 12.3 Components
    • 12.4 USB controller
    • 12.5 DC controller
    • 12.6 Stepper motor
    • 12.7 Electrical components
    • 12.8 Cabling summary
  • P250 French ^[7]
    • 1. General description
    • 2. Housing ^[4]
      • 2.1 Introduction
      • 2.2 Emergency switch
      • 2.3 Stack cover
      • 2.4 Upper cover
    • 3. Power and control
• Pannoramic Confocal ^[102]
  • General description
  • 1 Housing ^[5]
    • 1.1 Introduction
    • 1.2 Housing switch
    • 1.3 Front door
    • 1.4 Scanner base
    • 1.5 Sidewall
  • 2 Construction ^[9]
    • 2.1 Introduction
    • 2.2 Scanner unit
    • 2.3 Shutter mechanics
    • 2.4 X-Y stage unit
    • 2.5 Focus unit
    • 2.6 Preview unit
    • 2.7 Brightfield illumination unit
    • 2.8 Tray and slide loader unit
    • 2.9 Tilting table
  • 3 Optics and illumination ^[10]
    • 3.1 Introduction
    • 3.2 Brightfield illuminated optical path
    • 3.3 Configuring the light sources and units
    • 3.4 Components ^[3]
      • 3.4.1 Filling up the pipette
      • 3.4.2 Image path
      • 3.4.3 Mounting the spinning disc unit
    • 3.5 Illumination path adjustment
    • 3.6 Image path adjustment
    • 3.7 Optical path adjustment
  • 4 Preview unit ^[9]
    • 4.1 Introduction
    • 4.2 Configuring the preview unit
    • 4.3 Components
    • 4.4 Defining the scan area
    • 4.5 Adjustments of the preview unit ^[4]
      • 4.5.1 Setting the aperture of the preview objective
      • 4.5.2 Adjusting the focus of the preview objective
      • 4.5.3 Adjusting the rotation angle of the preview camera
      • 4.5.4 Adjusting the position of the brightfield preview illumination
  • 5 Focus unit ^[9]
    • 5.1 Introduction
    • 5.2 Configuring the focus unit
    • 5.3 Functional overview
    • 5.4 Components ^[3]
      • 5.4.1 Objective position
      • 5.4.2 Condenser unit mounting
      • 5.4.2.1 Adjusting the condenser position
    • 5.5 Adjustments of the focusing part
    • 5.6 Exchanging the focus unit
  • 6 Objective changer ^[14]
    • 6.1 Introduction ^[1]
      • 6.1.1 Unit differences compare to Pannoramic P250 FLASH
    • 6.2 Configuring the objective changer unit ^[1]
      • 6.2.1 Changing the objective
    • 6.3 Functional overview
    • 6.4 Components ^[2]
      • 6.4.1 Permanent magnet position
      • 6.4.2 Mounting the objectives
    • 6.5 Adjustments of the objective changer unit ^[1]
      • 6.5.1 Dismounting and mounting the objective
    • 6.6 Checks for the objective changer unit
    • 6.7 Setting up the objectives
    • 6.8 Aligning the objective position into the optical axis ^[1]
      • 6.8.1 Aligning tools
  • 7 X-Y stage unit ^[7]
    • 7.1 Introduction ^[1]
      • 7.1.1 Enhancements in the Pannoramic Confocal
    • 7.2 Configuring the X-Y stage unit
    • 7.3 Functional overview
    • 7.4 Components
    • 7.5 Carriage unit adjustments
    • 7.6 Exchanging the X-Y stage unit
  • 8 Main accessory ^[9]
    • 8.1 Introduction ^[1]
      • 8.1.1 Unit differences compare to Pannoramic MIDI
    • 8.2 Configuring the tray loader unit
    • 8.3 Components ^[2]
      • 8.3.1 Slide sensing
      • 8.3.2 Principle of the support plate
    • 8.4 Setup and adjustment procedures
    • 8.5 Adjustment tests
    • 8.6 Exchanging the tray and slide loader units
  • 9 Confocal unit ^[7]
    • 9.1 Introduction
    • 9.2 Configuring the Aurox CC88
    • 9.3 Functional overview
    • 9.4 Optical paths of the Aurox CC88
    • 9.5 Components ^[1]
      • 9.5.1 Inserting and removing filter cubes
    • 9.6 Mounting and connections
  • 10 Power and control ^[9]
    • 10.1 Introduction ^[1]
      • 10.1.1 Unit differences compare to Pannoramic MIDI
    • 10.2 Configuring the electrical components
    • 10.3 Components
    • 10.4 USB controller
    • 10.5 X-Y-Z motor electronics
    • 10.6 Stepper motor
    • 10.7 Electrical components
    • 10.8 Cabling summary
  • 11 Adjustment procedures ^[2]
    • 11.1 Setting up the scanner mechanics
    • 11.2 Setting up the scanner optics
• Common scanner informations ^[164]
  • General description
  • 1 Introduction
  • 2 Safety precautions ^[3]
    • 2.1 Electrical precautions
    • 2.2 Mechanical precautions
    • 2.3 Chemical precautions
  • 3 Computer and configuration ^[3]
    • 3.1 Installing Solios board
    • 3.2 Installing FireWire board
    • 3.3 Checking the COM port addresses
  • 4 Drivers and software ^[18]
    • 4.1 Setting up the operating system ^[1]
      • 4.1.1 Cloning the operating system
    • 4.2 Matrox Imaging Library
    • 4.3 Setting up the preview cameras ^[3]
      • 4.3.1 Installing the driver of the VRmagic preview camera
      • 4.3.2 Installing the driver for the DFK21F04 preview camera
      • 4.3.3 Installing the CamLab program for VRmagic preview camera
    • 4.4 Setting up the USB driver ^[2]
      • 4.4.1 Installing the USB driver for Windows 7
      • 4.4.2 Installing the USB driver for Windows XP
    • 4.5 Setting up the scan cameras
    • 4.6 Setting up the scan program ^[1]
      • 4.6.1 Installing the scan program
    • 4.7 Setting up the service program
    • 4.8 Setting up the viewer program ^[1]
      • 4.8.1 Installing the viewer program
    • 4.9 Setting up the dongle
    • 4.10 Software requirements until software version 1.14
  • 5 Scan cameras ^[5]
    • 5.1 Installing the driver for the AxioCam MRm camera for Windows 7
    • 5.2 Installing the driver for the AxioCam MRm camera for Windows XP
    • 5.3 Installing the driver for Marlin and Stingray cameras for Windows 7
    • 5.4 Installing the driver for Marlin and Stingray cameras for Windows XP
    • 5.5 Installing the driver for the Sony DFW-X710 camera
  • 6 Dongles ^[1]
    • 6.1 Installing the drivers for barcode reading
  • 7 Optics and illumination ^[6]
    • 7.1 Brightfield light source
    • 7.2 Fluorescent light source
    • 7.3 Setting up filters
    • 7.4 Fluorescent light and image path
    • 7.5 Color matrix setup
    • 7.6 Handling light path errors
  • 8 Preview unit ^[8]
    • 8.1 Brightfield preview calibration ^[2]
      • 8.1.1 Preview calibration 1
      • 8.1.2 Preview calibration 2
    • 8.2 Darkfield preview calibration ^[2]
      • 8.2.1 Manual darkfield preview calibration
      • 8.2.2 Principle of the darkfield calibration program
    • 8.3 Adjusting the pixel position
    • 8.4 Barcode reading and adjustments
  • 9 Focus unit ^[6]
    • 9.1 Functional overview
    • 9.2 Principle of focusing
    • 9.3 Components
    • 9.4 Exchanging the focus unit
    • 9.5 Shutter mechanics
    • 9.6 Focus unit adjustments
  • 10 X-Y stage unit ^[6]
    • 10.1 Components
    • 10.2 Configuring the X-Y stage unit
    • 10.3 Exchanging the X-Y stage unit
    • 10.4 Carriage unit parts assembling ^[1]
      • 10.4.1 Carriage unit adjustments
    • 10.5 Adjusting the parallelogram
  • 11 Power and control ^[7]
    • 11.1 Power supply
    • 11.2 USB controller ^[1]
      • 11.2.1 Address assigning tool
    • 11.3 Controller connections
    • 11.4 Stepper motor
    • 11.5 Electrical components
    • 11.6 Cabling summary
  • 12 Slide information
  • 13 Support and service ^[4]
    • 13.1 Recommended maintenance
    • 13.2 Pannoramic Confocal malfunctions
    • 13.3 Cleaning optics ^[1]
      • 13.3.1 Cleaning techniques
  • 14 Tools and requirements
  • 15 Slide Scanner Service program ^[6]
    • 15.1 Setting up the service program
    • 15.2 Options and tools ^[3]
      • 15.2.1 Pannoramic P250 FLASH tools
      • 15.2.2 Pannoramic MIDI tools
      • 15.2.3 Pannoramic DESK tools
    • 15.3 Shutdown processes
  • 16 Software versions ^[7]
    • Software version 1.20
    • Software version 1.19
    • Software version 1.18
    • Software version 1.17
    • Software version 1.16
    • Software version 1.15
    • Software version 1.14
  • 17 FOV and preview area ^[1]
    • 17.1 Theory
  • 18 Inserting and removing the slide manually
  • 19 Serial number structure
  • 20 Handling of initialization files
  • 21 Batch test
  • 22 Tutorials ^[1]
    • 22.1 Basics
  • 23 General service actions ^[3]
    • 23.1 Adjusting the magazine unit
    • 23.2 Checking the preview camera
    • 23.3 Defining the hardware limits
  • FiberVision S ^[54]
    • General description
    • 1 Housing ^[2]
      • 1.1 Introduction
      • 1.2 Removing and mounting the housing
    • 2 Construction ^[6]
      • 2.1 Introduction
      • 2.2 Base plate
      • 2.3 Scanner plate
      • 2.4 Turret plate
      • 2.5 Truss
      • 2.6 Supporter tube
    • 3 Optics and illumination ^[5]
      • 3.1 Introduction
      • 3.2 Components
      • 3.3 Optics and illumination adjustments
      • 3.4 Image path adjustment
      • 3.5 Optical path adjustment
    • 4 Preview unit ^[2]
      • 4.1 Introduction
      • 4.2 Components
    • 5 Focus unit ^[3]
      • 5.1 Introduction
      • 5.2 Configuring the scanner with objective changer
      • 5.3 Exchanging the objective
    • 6 X-Y stage unit ^[5]
      • 6.1 Introduction
      • 6.2 Components
      • 6.3 Configuring the X-Y stage unit
      • 6.4 Exchanging the X-Y stage unit
      • 6.5 Finding the hardware limits
    • 7 Turret unit ^[7]
      • 7.1 Introduction
      • 7.2 Functional overview
      • 7.3 Construction
      • 7.4 Components
      • 7.5 Exchanging the filter blocks
      • 7.6 Adjustment tools
      • 7.7 Adjustment procedures
    • 8 Main accessory ^[7]
      • 8.1 Introduction
      • 8.2 Components
      • 8.3 Slide sensing
      • 8.4 Principle of the slide loader movement
      • 8.5 Setup and adjustment procedures
      • 8.6 Adjustment tests
      • 8.7 Exchanging the tray unit
    • 9 Power and control ^[7]
      • 9.1 USB controller
      • 9.2 DC controller
      • 9.3 Controller connections
      • 9.4 Stepper motor
      • 9.5 Electrical components
      • 9.6 Cabling summary
      • 9.7 Power supply